Submersible Effluent Pump – 1/2 HP – 115V – 1 Ph – 3,500 RPM – 140 GPM – 2 Port
Press to translate Listing Translator by HindiPortugueseThaiKoreanFrenchChineseSpanishArabicJapaneseGermanRussianItalianstart_elivehelp_btncodedocument.write('')end_elivehelp_btncode FREE SHIPPING OFFERFree Shipping within the Lower 48 United States. If yo
Press to translate Listing Translator by HindiPortugueseThaiKoreanFrenchChineseSpanishArabicJapaneseGermanRussianItalianstart_elivehelp_btncodedocument.write(‘<'+'sc'+'rip'+'t src="ht'+'tp:'+'/'+'/eliv'+'ehel'+'p.'+'net/me'+'mber'+'s/btn'+'li'+'nk/?id=&idnum=1812">‘)end_elivehelp_btncode
FREE SHIPPING OFFER
Free Shipping within the Lower 48 United States. If you are located outside of the Lower 48 United States, please request a freight quote.
Model Number:
PTWBB630890
Condition:
New
Description:
Submersible Effluent Pump – 1/2 HP – 115 Volts – 1 Ph – 3,500 RPM – 140 GPM – 2″ Port
Features:
This effluent pump (liquid waste or sewage discharged) is constructed of cast iron, while the featuring a volute casing, and stainless steel shaft. This unit can handle solids up to 3/4″ (in).A 2″ NPT discharge allowing for maximum efficiency. Partial open and non-clog cast iron impeller. Impeller has pump-out vanes for seal protection and balanced for smooth operation. Includes stainless steel fasteners. Capable of running dry without damage to any components. Motor is fully protected and submerged in commercial-duty turbine oil for lubrication and heat transfer. Positive sealing against harsh contaminants and leakage is protected with the O-ring. Commercial-grade oil and water resistant 20′ (ft) long power chord. Buy confidently knowing this is CSA listed.
Contact Us:
Phone (Toll Free):
Email:eBay mail or our customer service email
See similar items in our eBay Store
Please Note: This item is BUILT to order
Please allow 10 to15 Business Days for manufacturing and shipping
Description & Specification:
LENGTH: 8 1/2″ (in)
WIDTH: 11 1/2″ (in)
HEIGHT: 16″ (in)
DISCHARGE CONNECTION SIZE: 2″ (in)
MAXIMUM DIAMETER SOLIDS: 3/4″ (in)
CONSTRUCTION: Cast Iron
SHAFT SEAL CONSTRUCTION: Silicon Carbide
IMPELLER MATERIAL: Cast Iron
ROTATIONS PER MINUTE: 3500 (RPM)
TEMPERATURE OF LIQUID PUMPED: 104 Continuous/140 Intermittent
VOLTAGE: 115
PHASE: 1
HERTZ: 60
AMPS: 14.5
HORSEPOWER: 1/2 (HP)
GALLONS PER MINUTE: 140 (GPM)
CORD LENGTH FEET: 15′ (ft)
DISCHARGE CONNECTION TYPE: NPT
SWITCH TYPE: Plug/No Switch
Shipping Terms
Shipping and Handling: FREE within the Lower 48 United States. All other locations, please contact us for a shipping quote.
Shipping Insurance:
Reviews
There are no reviews yet.